Bruno Out-Sider Scooter/Wheelchair Lift - Washington (1 of 1)

Bruno Out-Sider Scooter Lift

Ath the touch of a button the Bruno Out-Sider with stow your scooter or wheelchair for transportation. Simply roll your mobility device on the platform from either side, hit a button, and let the Out-Sider do the lifting for you. Wheelchairs and scooter are automatically secured for you. Retractable belts are also available for securement.

Bruno Out-Sider Scooter Lift Highlights

  • Fully Powered - Makes lifting and storing your scooter or powerchair outside your vehicle virtually effortless - one button operation
  • Smooth drive on/off platform - no reversing necessary
  • Platform automatically folds up when not in use
  • Scooter with Hold-Tite foot or Powerchair with Hold-Tite arm are automatically secured when lift is raised
  • Version with retractable belts for securement also available
  • No scooter or powerchair modifications
  • Operating handle includes intuitive up/down switch orientation, while maintaining Bruno's industry exclusive safety latch for unintended lowering
  • Swing-Away option available for rear hatch access
  • Manual Backup System and standard lighted License Plate Holder
  • Lift powered by the vehicle's battery
  • No structural modifications to your vehicle - mounts to your vehicle's class II or class III hitch receiver (not included)
  • Works with minivans, SUVs, CUVs, pickup trucks, full-size vans and sedans (check with your local Bruno dealer to confirm compatibility with your vehicle)

Bruno Out-Sider Scooter Lift User Requirements

  • Walk from the front to the rear of the vehicle and vice versa
  • Stand two to three minutes
  • Drive mobility device on/off platform
  • Hold down a button on the control arm
  • Securement:
  1. For Automatic Hold-Tite for Scooters version, there are no additional requirements
  2. For Automatic Hold-Tite for Powerchairs version, release and swing arm into position (one handed operation)*
  3. For Retractable Belts version, lean over to hold release lever, then connect hook to receiver on powerchair or scooter.
  • If using a Swing-Away, lean over, release lever, and swing the lift away from the rear of the vehicle*

Brun Out-Sider Scooter Lift Specs

  • Lifting Capacity: 350 lb/159kg
  • Height Adjustable Range: Standard Range Module – 7"/17.8 cm to 19"/49.5 cm
  • Hitch Class: II or III
  • Platform Measurements (Width): 28.5"/ 72.4 cm
  • Applications: Minivans, SUV's, CUV's, Pickup Trucks, Full-size Vans, select Sedans
  • Warranty: 3 years

ASL-250A or ASL-250B:

  • Mobility Device Securement Methods: Hold-Tite Foot (ASL-250A) or three retractable belts (ASL-250B)
  • Installed Weight w/out Swing-Away: ≈105 lb/48kg
  • Installed Weight w/Swing-Away: ≈142 lb/64kg
  • Maximum Scooter Wheelbase (center of wheel to center of wheel): 24"/61 cm to 37"/93.9 cm (length) x 28"/71.1cm (width)
  • Maximum Powerchair Width (outside of wheel to outside of wheel): 28"/ 71.1 cm (ASL-250B only)

ASL-250HTP (Powerchair version) only:

  • Mobility Device Securement Method: Hold-Tite Arm
  • Installed Weight w/out Swing-Away: ≈110 lb/50kg
  • Installed Weight w/Swing-Away: ≈147 lb/67kg
  • Maximum Powerchair Width (outside of wheel to outside of wheel): 28"/ 71.1 cm


  • Install Weight: 44 lb/20 kg (including hardware and hitch adapter)
  • Hitch Class: II & III
  • Vertical Adjustment: 7"/17.8 cm to 19"/49.5 cm